POLYMERIZATION MECHANISM OF N-VINYLCARBAZOLE WITH CHIRALLY ORGANIC SALT AS CATALYST

The polymerization mechanism is described by the conductance changewith the time during the polymerization. The mechanism can be explained by the equi-librium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated bythe organic salt (-) Sp~/(*~+) (+) CSA~(*~-) (An asterisk represents the chirality) and the schemeof the polymerization process is described mainly by the charge transfer complexes havingchiral induction power.     

溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.     

氧化铽团簇的表面修饰及对其荧光特性影响的研究

采用脉冲激光轰击浸于流动相中的氧化铽固体靶，考察了流动相及其流速、脉冲激光输出功率、修饰剂、添加修饰剂顺序等对所获得的氧化铽有机溶胶荧光性能的影响。UV-Vis和荧光光谱的测试表明：以含有修饰剂的无水乙醇作为流动相，可得到良好荧光性能的氧化铽乙醇溶胶，而环己酮与醋酸乙酯均不适合作为该体系的流动相;最佳流速为0.15 mL·s^-1；脉冲激光输出功率大有利于其荧光性能；最佳修饰剂为乙酰丙酮(acac)和2，2′-联吡啶(2，2′-bipy)，且应原位修饰。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

麻黄中伪麻黄碱在小鼠组织中的分布研究

为了解麻黄(Herba ephedrae,简称HE)中伪麻黄碱(Pseudoephedrine,简称PE)在小鼠脑、肺、心、肝、肾的分布变化,探讨HE的归经,用GC-MS/SIM法,分析了用药后30、60、120 min PE在小鼠脏器分布量。结果表明,PE于不同时间点在小鼠脏器的分布由多到少的顺序是:30 min时,肺脏(肾脏、肝脏、脑),心脏;60 min时,肾脏,心脏(肝脏),脑,肺脏;120 min时,脑,肾脏,心脏,肝脏(肺脏)。本试验从PE在小鼠体内脏器的分布量初步反映了HE的归经趋势。     

表面等离子体子共振技术用于分析手性药物与蛋白作用差异的研究

利用自行设计组装的一套以白色发光二极管为光源的新型表面等离子体子共振传感器实验装置测量了手性药物D-苯甘氨酸与L-苯甘氨酸与人血清白蛋白和鼠血清白蛋白的结合程度, 可以看到这一对手性药物与血清蛋白的结合程度的差异, 通过这种方法可以区分一对手性药物中的不同异构体. 与现在的手性分析方法比较, 这种方法具有不用标记、样品用量少、仪器易于自动化及小型化等优点.     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

N—BOC—8—氨甲基—2—萘甲酸的改进合成法

以２－萘甲酸为原料，经硝化，酯化，重氮化，选择性催化氢化，ＢＯＣ酸酐保护等六步反应，完成了Ｎ－ＢＯＣ－８氨甲基－２－萘甲酸（１ａ）的合成，为化合物１的合成提供了新的合成途径。     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.